一、日本爱模KTS热电偶变送器的产品概述
日本爱模KTS热电偶变送器是苏州科元代理的日本M-SYSTEM系列产品之一,KTS热电偶变送器是接收来自现场热电偶传感器信号,经过线性化处理后,提供输出标准的过程信号的仪表.
二、日本爱模KTS热电偶变送器的产品选型指南
Code number: KTS-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. KTS-2A-B/BL/Q)
• Temperature range (e.g. 0 – 800°C)
• Special output range (For codes Z & 0)
• Specify the specification for option code /Q
(e.g. /C01/S01)
[1] INPUT THERMOCOUPLE
1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
7: R (Usable range -50 to +1760°C, -58 to +3200°F)
8: S (Usable range -50 to +1760°C, -58 to +3200°F)
N: N (Usable range -270 to +1300°C, -454 to +2372°F)
0: Specify
[2] OUTPUT
Current
A: 4 – 20 mA DC (Load resistance 750 Ω max.)
B: 2 – 10 mA DC (Load resistance 1500 Ω max.)
C: 1 – 5 mA DC (Load resistance 3000 Ω max.)
D: 0 – 20 mA DC (Load resistance 750 Ω max.)
E: 0 – 16 mA DC (Load resistance 900 Ω max.)
F: 0 – 10 mA DC (Load resistance 1500 Ω max.)
G: 0 – 1 mA DC (Load resistance 15 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 100 Ω min.)
4: 0 – 10 V DC (Load resistance 1000 Ω min.)
5: 0 – 5 V DC (Load resistance 500 Ω min.)
6: 1 – 5 V DC (Load resistance 500 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
[3] POWER INPUT
AC Power
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
DC Power
S: 12 V DC
R: 24 V DC
[4] OPTIONS (multiple selections)
Response Time (0 – 90 %)
blank: Standard (≤ 0.5 sec.)
/K: Fast Response (Approx. 25 msec.)
Burnout
blank: Upscale burnout
/BL: Downscale burnout
/BN: No burnout
CJC Sensor
blank: With Cold Junction Compensation Sensor
/N: Without Cold Junction Compensation Sensor
Other Options
blank: none
/Q: Option other than the above (specify the specification)
三、产品结构图以及系列型号列举
隔离器和传感器输入变换器
W2VS W2VF W2TS W2RS W2MS W2TG W2AC W2PA W2PE W2CA W2CE
KYV信号变换器
KSN信号变换器
KWYV信号变换器
KVS信号变换器
KTS信号变换器
KGS信号变换器
KTG信号变换器
KAC信号变换器
M2VS-AA-M M2VS-AA-M M2VS-AA-R/K M2VS-AA-R2/N M2VS-AA-R2/N M3LM-R4/A M3LR-R4/A
M3LU-R4/A M3LU-R4/A M3LU-R4/A M3LU-R4/A M3LV-R4/A
日本爱模KTS热电偶变送器是苏州科元代理的日本M-SYSTEM系列产品之一,日本爱模系统是信号变换器的专业生产厂，每年销售信号变换器的数量达25万台以上,深受广大客户喜爱.
